News & Insights
Stay up to date with Shenzhen Shanwu Technology Co., Ltd. — news, industry insights, and technology stories.
One Chip, 25W Magnetic Charging: How Qi2.2 Power Banks Shrunk
In May 2026 Injoinic unveiled a single-cell Qi2.2 power-bank chipset (SW6258 + SW5108) delivering 25W magnetic wireless and 30W wired. As Qi2.2 passes 500 certifications worldwide, we break down how one chip shrinks the bank and why GB 47372-2026 matters.
How to Pick a Car Magnetic Wireless Charger: Ventilation, Wattage, Compatibility
A car wireless charger that drains the battery while mounted is usually the wrong mount. This guide covers vent cooling, Qi2.2 wattage marks and iPhone vs Android compatibility, with a pre-buy checklist.
Why Qi2.2's 40°C Surface Cap Is the Real Watershed for 25W Magnetic Wireless Charging
Qi2.2 is not just a power jump from 15W to 25W. The WPC standard now hard-caps device surface temperature at 40°C, a pass/fail rule in certification. That single line retires the old 'big wattage' storytelling and turns GaN transistors, real-time FOD, and dynamic power throttling from nice-to-haves into table stakes.
Elderly AI Companion Robots: Are They Worth It Now That US Medicaid Is Paying?
In 2026, Washington state became the first US state to fully reimburse a social AI companion robot (ElliQ) under Medicaid. For families weighing a purchase for a solo-living elder, here is a clear-eyed breakdown: hardware cost, subscription model, clinical evidence, privacy terms, and whether the maker will still be around in three years.
A Year of Wireless Charging Going Global: Why OEMs Now Compete on Standards, Not Price
Wireless charging exports are shifting in 2026: the WPC pushed Qi2.2 magnetic charging to 25W and made certification a hard gate for Western retail. We look at market size, the EU RED/EN 50665 efficiency and RF rules, and why OEMs now compete on standards.
Semi-Solid-State Batteries in Magnetic Power Banks: Why They Run Cooler and Safer
In 2026 a batch of magnetic power banks switched to semi-solid-state (gel electrolyte) cells instead of liquid lithium-ion. We explain why it is safer and cooler, and what to check under Qi2.2 and GB 47372-2026.
How to Pick a 3-in-1 Wireless Charger: Desk vs Travel
A 3-in-1 wireless charger should be picked by real per-device wattage, not the summed total. We cover Qi2.2 speed, Magnetic Power Profile alignment, desk vs travel trade-offs, and a checklist to skip slow or unsafe units.
Magnetic Power Banks in 2026: From Geek Accessory to Daily Essential
Magnetic power banks went from geek accessory to daily essential in 2026, thanks to Qi2.2, better cells and cooling. We look at who uses them and the three checks to pick a safe, fast one.
Choosing a bedside wireless charger: at night, light, noise and heat beat wattage
The nightstand is where wireless chargers end up most often, and it is also where the buying logic changes. At night you are most sensitive to light and sound, so wattage is not the point. Indicator light, fan noise, grip and thermal control are.
Wireless power is moving past phones: remote power is taking over sensors and locks
A new track is forming, and it is not about charging phones. It powers the small devices whose batteries are the most annoying to replace. Radio frequency, infrared and magnetic resonance are all shipping, turning wireless power from an accessory into infrastructure.
A wireless charging pad is a tuned resonant circuit: capacitors, Q, and the 25W match
Two pads both claim 25W, yet one charges fast while the other runs hot and throttles. The difference rarely comes from the wattage number. It comes from resonance, coil quality factor, and whether the system can retune after misalignment.
Want a wireless charger in the kitchen or bathroom? Clear three hurdles first
Reading a recipe while cooking or playing music in the shower makes a charging pad by the water tempting. Yet kitchens and bathrooms are the least friendly rooms in the house: steam, grease, heat sources, and a badly overused word, waterproof.